Product/Service

BTSR IDS/IS3

Source: PAF Sales, LLC
The BTSR IDS/IS3 family of sensors can be used to reliably detect yarn & thread breaks in all textile processes
The BTSR IDS/IS3 family of sensors can be used to reliably detect yarn & thread breaks in all textile processes

User programmable IS3 sensors can be used with all types of yarn, thread and fiber-elastic, monofilament, antistatic & conductive, cotton, dyed, etc.

Versatile: IS3 sensors can be used with 10 denier to 30,000 denier yarn and fiber. Yarn speed can be as slow as 1.5 m/min. Sensor can be used in a balloon or in a controlled yarn path.

Fast: IS3 sensors can be programmed for a response time of 5 msec to 1000 msec.

Portable: IS3 sensors can be programmed in the electronics shop and installed on the production floor.

Smart: IS3 sensors have a green and red LED to indicate yarn status. A green LED means the yarn is running normally. A solid red LED means the yarn is not running, but the sensor is powered up. A flashing red LED indicates a yarn or thread break.

Addressable: IS3 sensors are addressable when used with the Smart 200T Controller.

Smart 200T Controller displays the status of all sensors and address or location of all yarn and thread breaks. Also displays number of yarn breaks for each sensor.

PAF Sales, LLC, P.O. Box 35287, Greensboro, NC 27425-5287. Tel: 336-605-1196; Fax: 336-668-4219.