Hazardous Waste Stainless Steel and Poly Vacuums

Poly and stainless steel tank models have the same standard quality features as our Industrial Wet/Dry vacuums.

An optional wet conversion kit converts the dry vacuum over for liquid pickup. The vacuum must be equipped with a by-pass motor to use this kit.

Units are shipped with intermediary micropore-filter (2/pk), 2-ply disposable filter bags (5/pk) and 6 mil poly bags (5/pk) with OSHA markings. HCS models include 1 1/2" dry tool kit and HP models a wet/dry tool kit.

Equipped with a HEPA filter system. Consisting of a primary certified high efficiency particulate filter, double layer intermediary micro filter and totally enclosed two-ply disposable paper filter bag. The HEPA filter has a steel outer casing and micro-fibered glass paper filter media separated by corrugated aluminum sheeting that is encased in a protective steel screening.

The HEPA filter is rated with a minimum efficiency of 99.97% at 0.3 microns. Tested using the HOT DOP method @ 100 CFM.

Upkeeper Corporation, PO Box 23480, Charlotte, NC 28227. Tel: 704-545-7040; Fax: 704-545-5834.