Continuous Coater Type BA
Source: Werner Mathis USA, Inc.
These laboratory or pilot installations can consist of various individual elements. For instance several application modules such as knife over roll, floating knife, reverse roll coater etc as well as laminating units, predryers or cooling rollers at the exit.
These laboratory or pilot installations can consist of various individual elements. For instance several application modules such as knife over roll, floating knife, reverse roll coater etc as well as laminating units, predryers or cooling rollers at the exit. The pictured range consists of: - unwinding device with expansion shaft - roller application unit with flat or engraved roll - knife over roll - IR predryer - stenter frame - laminating station and upwinding device. According to the coating pastes or liquids applied, the ranges can also be designed for the use of solvents. Then the range will be made in explosion protected design. Depending on the industry in which the range will be used also clean room cabines as well as finefilters can be added to the dryers.
- material width 300, 450 or 600 mm
- coated width 250, 400 or 550 mm
- running speed 0.2 - 10 m/min material content dryer 1.6 m
- temperature up to 250°C
- heating capacity approx. 24 kW
- space requirements approx. 7.4x1.6 m
Werner Mathis USA, Inc., 2260 Hwy 49 NE, P.O. Box 1626, Concord, NC 28026-1626. Tel: 704-786-6157; Fax: 704-786-6159.