Filter Pleating Machines
Source: Enguda International LTD.
Heavv Duty- EG-707 Blade Type Accordion Pleating Machine.
EG-707 Blade Type Accordion Pleating Machine Technical data:
- Working Width: 12" (305 mm) to 96" (2,438 mm)
- Pleating Height: 1/8" (3 mm) to 8" (203 mm)
- Pleating Speed: up to 100 pleats/min ( depending on material & pleating height )
- Pleated Material: paper, cellulose media, spunbond polyester. fiberglass . wire mesh ----
- Media Layers: up to 10 layers ( heavy duty type )
- Change Pleating Height: less than 5 minute
- Compressed Air: 90 psi
Standard EG-707 Blade Type Accordion Pleating Machine.
Pleating height from 3/8" to 1 ", pleating speed up to 1 00 pleatsimin. niedia lay,~r tip to 2 layers, depending on material.
Heavv Duty- EG-707 Blade Type Accordion Pleating Machine.
Pleating height f'om 3/ 8- to 1 ", pleating speed up to 100 pleats/min, media layer up to 10 layers.
Options:
- Unwind stand, and Extension table
- Pre-heat, Post-heat and Outlet table cooling device
- Counting & Marking Device
- Pleating height down to 1/8"
- Pleating height up to 2", 4", 6" and 8"
- Slitting Device, Cross-Cut Device
- Customer Designs
Enguda International LTD., 1365 Midway Blvd., Unit 30, Mississauga, ON L5T 2J5. Tel: 905-564-1765; Fax: 905-564-7290.
This website uses cookies to ensure you get the best experience on our website. Learn more