Hot Knife Cutter

The RX-80 is a general purpose hot knife cutter used for hot cutting and melting woven and knitted synthetic materials to prevent fraying. Cuts all types of synthetics such as webbing, braid, elastics, strapping, cord, ribbon, hook & loop, and rope.

To operate, simply slide the webbing across the base plate and bring the handle down to cut and seal with minimum effort. Cutting time is usually less than one second, depending upon material thickness and heat setting.

OTHER VERSIONS & OPTIONS:
RX-80H/ Hole Punch Device: punches single holes from 3/32" to 1/2" diameter; can be built for multiple holes, and combinations of cutting and holes; oversize holes and special shapes are also available.

RX-80L/ Long Arm Hot Knife: hot knife mounted on long lever for special applications. Mounts directly to table top with "L" brackets supplied. Includes stainless steel cutting pad. Heat control mounted near handle for easy access.

RX-80R/ Radius-Cut Hot Knife: specially machined hot knife tools for cutting rounded and shaped ends. Standard sizes designed for cutting 1", 1.5", and 2" webbings. Special sizes and other shapes are also available.

RX-80W/ Extra Wide Hot Knife: 8" wide hot knife for special and wide materials, such as sling webbing, netting, and multiple end cutting. Other sizes can be built to order.

The RX-80 Series offers many different types of standard and custom-built cutting tools, for producing shaped pieces of all types.

Nova Tech International, L.L.C., P.O. Box 35751, Greensboro, NC 27425. Tel: 800 794-6682; Fax: 336 643-8180.