The Pillow Stuffer is a reliable, cost effective way of stuffing non-woven pillow batts. Reliability comes from a design which incorporates heavy steel...
The Pillow Stuffer is a reliable, cost effective way of stuffing non-woven pillow batts. Reliability comes from a design which incorporates heavy steel construction which includes 1/4" thick steel side plates and strong structural steel channel legs. The stuffer may be hand fed or automatically fed by means of a Wind, Cut and Doff machine. The wound batt enters the rear of the stuffer from the attached conveyors and is compressed by a set of endless stuffing belts driven by large rubber coated steel rolls. These belts feed the batt through the nose piece and into the hand held pillow tick. The stuffing belts' longevity is aided by a nose roller design. The stuffer can be permanently mounted to the floor or can be made into a mobile unit with the addition of optional heavy-duty casters.
Can be coupled with the company's Auto Cut Doff System (WCDS)
Rugged design, mechanically reliable
Optional mobile configuration
Endless self tracking belting
Optional Customer defined discharge height
Precision bearing nose rollers
Can be retrofitted to existing systems
Belt widths from 5" to 15"
Capable of foam insertion, unusual form shapes
Two machines can be arranged to run back to back pillows
Suitable for craft bags
Length: 17' - 9" (with standard rear conveyor)
Width: 2' - 10"
Height: 4' - 8"
Weight: 2,000 lb.
Voltage: (as required)
Wise Industries, Inc., PO Box 1159, Kings Mountain, NC 28086. Tel: 704-739-4531; Fax: 704-739-4533.