Type 766 ROVEMATIC

Specifications: Model Designation Type 766 Gauge 300 mm (11.81") Number of Spindles 32 through 112 Staple Range Processed 22 through 76 mm (7/8" through 3") Bobbin Size 464 X 48 mm (18.27" X 1.89") Hank Roving Produced .50 through 3.0 Ne (1180 tex through 197 tex) Maximum Flyer Speed Up to 1450 rpm Builder Computer control regulates bobbin build, taper, and tension of roving during winding Flyers Top-drive, drop-leg flyers are driven by individual DC motors Spindles Individual motor-driven spindles. Speed is changed every traverse to compensate for bobbin diameter Draft Rolls Four-boss section, four sections per bay. Four-roll, double-apron system or three-roll, double-apron system. Controls Computer control of spindle speed, twist, package build, doffer motions, and total frame monitoring. Motors Traverse- DC motor with 20/1 reducer.
Traverse- DC motor with 10/1 reducer
Front Roll- DC motor with 30/1 reducer
Back Roll- DC motor with 5/1 reducer Creel Power-driven creel, three octagonal rolls with guide fingers. Doff Controls At full package, frame goes through doff cycle and communicates with roving transport system to doff frame. Stop Motion Individual end detectors (IED) for detecting flyer breaks and roll laps. Photoelectric creel stop. Electrical safety stop motion switches at flyer shield and head-end cabinet. Emergency stop. Vacuum End Collection System Suction collection system for top and bottom clearer waste. External blower, air-jet cleaning, flyer shelf, flyers, bottom shelf and creel. Frame and Creel Dimensions See floor plan an elevation

Saco Lowell, Inc., PO Box 2327, Greenville, SC 29602 2327. Tel: 864-859-3211; Fax: 864-859-2908.